Abstract
The present study aimed to model and optimize the dimethyl phthalate (DMP) degradation from aqueous solution using UVC/ Na2S2O8/Fe2+ system based on the response surface methodology (RSM). A high removal efficiency (97%) and TOC reduction (64.2%) were obtained under optimum conditions i.e. contact time = 90min, SPS concentration = 0.601mM/L, Fe2+ = 0.075mM/L, pH = 11 and DMP concentration = 5mg/L. Quenching experiments confirmed that sulfate radicals were predominant radical species for DMP degradation. The effect of CO3 - on DMP degradation was more complicated than other aquatic background anions. The possible pathway for DMP decomposition was proposed according to HPLC and GC-MS analysis. The average oxidation state (AOS) and carbon oxidation state (COS) values as biodegradability indicators demonstrated that the UVC/SPS/Fe2+ system can improve the bioavailability of DMP over the time. Finally, the performance of UVC/SPS/Fe2+ system for DMP treatment in different aquatic solutions: tap water, surface runoff, treated and raw wastewater were found to be 95.7, 88.5, 80.5, and 56.4%, respectively. Graphical abstract.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
