Abstract

In this study, the degradation of ciprofloxacin (CIP) in wastewater was investigated using UV-based sulfate radical advanced oxidation processes (SR-AOP) and UV-based advanced reduction processes (ARP). More specifically, a comparison of the UV-based persulfate advanced oxidation process (the UV/PS process) and the UV-based sulfite advanced reduction process (the UV/sulfite process) was made. Considering the UV-based SR-AOPs, the UV/PS process was much more efficient than the UV-based peroxymonosulfate advanced oxidation process (the UV/PMS process), with pseudo first order reaction rate constants (kobs) of 0.752 and 0.145 min−1, respectively. For the UV-based ARPs, the UV/sulfite process was the most efficient, compared to the UV/sulfide and the UV/dithionite process (kobs of 0.269, 0.0157 and 0.0329 min−1, respectively). The optimal process parameters for both the UV/PS and the UV/sulfite process were determined and the contribution of the produced reactive species were identified. For the UV/PS process, maximal CIP degradation was found at pH 8, and both OH and SO4− were responsible for CIP degradation. For the UV/sulfite process, H and eaq− were responsible for CIP degradation, with eaq− being the predominant radical at pH 8.5. Although CIP degradation was much faster for the UV/PS process, the UV/sulfite process was determined to be much more efficient in the defluorination of CIP.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.