Abstract

The electrochemical impedance spectroscopy and weight gain tests were performed on carbon fiber/vinyl ester and carbon fiber/bismaleimide composites in 3.5% NaCl solution to study the electrochemical and water absorption behaviors. The microstructure morphology and the flexural property of the composites in the long-term exposure process were analyzed with the scanning electron microscope and four-point bending tests. The results revealed that after long-time immersion (>200 d), the water absorption of the two composites is less than 0.5%. This has little effect on the microstructural integrity, only with slight damage on the fiber/resin interfaces, but results in a significant decrease (about 84%) in the composite flexural property. The variation of the water absorption percentage shows good consistency with that of the resin capacitance (Qc) and is negatively related to the variation of the resin resistance (Rpo) and the low-frequency impedance (|Z|0.01Hz) of the composites. A good linear relationship exists between the variations of phase angles in the middle-frequency range (0.1-10 Hz) and the |Z|0.01Hz. The phase angle at 10 Hz (θ10Hz) may be suggested as a suitable parameter to rapidly evaluate the performance of carbon fiber-reinforced polymer composites, just like for evaluating the protective performance of polymer-coated metals in the literature.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.