Degradation Issues in Solid Oxide Electrolysers

Abstract

One of the crucial aspects to achieving long lifetime and high-efficient SOCs (Solid oxide cells) is to enhance durability of the current devices.Degradation issues are typically associated with problems in both electrodes. For example, nickel-yttria stabilized zirconia (Ni-YSZ) hydrogen electrodes present under extreme conditions of high steam partial pressures, a low durability due to Ni oxidation resulting in lowered electronic conductivity and catalytic activity of the electrode. Ni agglomeration, depleting and micro crack in Ni-containing hydrogen electrode can also occur leading to a lower activity of the Ni-based electrodes as an SOEC fuel electrode. Furthermore, carbon deposition and sulfur poisoning on the Ni surface are also lead to cell performance degradation and poor durability.In addition, the performance of the oxygen electrode is also particularly more important in electrolysis mode than in fuel cell mode, as it is well established that electrochemically induced oxygen pressure increase at the electrolyte-oxygen electrode interface and subsequent membrane failure have been theoretically predicted and experimentally observed in SOEC mode. For example, several examples in the literature reported the presence on voids at the YSZ electrolyte, leading to delamination of the oxygen electrode. In this sense, lanthanide nickelates (Ln = La, Nd, Pr) have received considerable interest as materials for IT-SOFC electrodes and oxygen separation membranes, and they seem to be very attractive for electrolysis applications. The hyperstoichiometry of some oxygen electrode materials such as these Ruddlesden-Popper phases is believed to be favourable for effective oxygen evolution, as performance of these electrodes is enhanced in SOEC mode.Different strategies to develop optimized electrode structures as well as controlled operating conditions will be discussed in order to improve the durability of SOCs.