Deformation processes of ultrahigh porous multiwalled carbon nanotubes/polycarbonate composite fibers prepared by electrospinning

Abstract

Mechanical deformation processes of electrospun composite fibers based on polycarbonate with multiwalled carbon nanotubes (MWCNTs) were investigated by in situ tensile tests under transmission electron microscope (TEM) depending on morphology. Using chloroform as solvent and optimizing process conditions, uniform nanoporous composite fibers were generated by electrospinning process. TEM images indicate that the MWCNTs were embedded in the fibers as individual elements, highly aligned parallel to one another along the fiber axis, which makes the mechanical load transfer from the polymer matrix to the MWCNT more favorable. Due to the slippage of individual MWCNTs within the fibers the strain at break of composite fibers is significantly enhanced. In addition, the nanopores on the fiber surface provide the effective sites for stress concentration for the plastic deformation to form nanonecking of fibers under tensile load. Combination of these unique features makes the electrospun composite fibers extremely strong and tough. The results from present work may provide a feasible consideration of such electrospun composite fibers for use as the reinforcing elements in a polymer based composite of a new kind.