Abstract
ABSTRACTThe deformation behavior and shape recovery of an Fe-added AuCuAl shape memory alloy micropillar were investigated. XRD analysis revealed that Au-28Cu-22Al-2Fe (at.%) alloy contained a second phase which was evaluated to be α-Fe (bcc). SEM observation also confirmed the second phase at the surface of the micropillar specimen. A polycrystalline micropillar with 20 x 20 x 40μm rectangular was fabricated by a focused ion beam (FIB) system, and micro compress test was performed at room temperature. It was found that the yield stress of micropillar showed 50MPa, which must correspond to stress for inducing martensite. After the heating of the compressed micropillar, 1.75% shape recovery was recognized which is comparable to the transformation strain. Then, the Fe-added AuCuAl micropillar was concluded to possess good shape memory property, and thus this alloy may be suitable for small endovascular treatment which requires good X-ray radiography.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
