Abstract
A metallic glass matrix composite (MGMC) reinforced by copper short fibers has been prepared by warm extrusion of powders, and its deformation behavior at room temperature and in the supercooled liquid region of the metallic glass has been investigated. A mixture of Ni 59Zr 20Ti 16Si 2Sn 3 metallic glass powders and copper powders is extruded in the supercooled liquid region of the metallic glass with an extrusion ratio of 5. The volume fraction of the copper phase is 0.2. After extrusion, initially spherical powders are elongated along the extrusion direction; no pores are visible. The MGMC shows a high failure strength of around 1.85 GPa, slightly lower than that of the as-cast Ni 59Zr 20Ti 16Si 2Sn 3 metallic glass, under uniaxial compression. However, due to the crack bridging mechanism produced by the randomly distributed copper short fibers, the MGMC does not catastrophically fail by a single shear band propagating across the whole monolithic sample. In the supercooled liquid region of the metallic glass, the MGMC shows large elongation to failure but fails by cavitation due to the preexisting Ni-based crystalline powders.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
