Deformation and Damage Characteristics of Deep Rock Specimens Based on 3D-DIC and FBG

Abstract

Abstract Specimen-scale testing of loaded rock parameters is an important research component of rock mechanics testing. In this paper, a method combining 3D-DIC and FBG (fiber Bragg grating) technology is proposed and applied to the study of deformation and damage characteristics of deep limestone and sandstone specimens under uniaxial loading conditions in the Panxie mine area of Huainan coalfield. The selection of optical fiber, the bonding method, and the process of rock specimen fabrication are introduced in detail. Two different fiber Bragg grating sensor arrays were constructed by using both multi-inclination type and orthogonal type deployment of fiber grating to dynamically monitor the strain response of rock specimens throughout the whole process. The results show that both 3D-DIC displacement monitoring and fiber Bragg grating strain captured the rock deformation and failure process well with identical outcomes. Under a continuous load of 0.3 kN/s, the local cracks of the rock specimen and the damage to the rock specimen resulted in different degrees of sudden changes in the fiber strain value. According to the differences in the degrees of brittleness and texture densities of the rock specimens, the local cracks evolution to transfixion of the limestone registered a certain time accumulation and produced more local cracks, while the sandstone at the same stage produced fewer local cracks within a shorter duration. The effective combination of regional noncontact testing and high-precision point contact can dynamically and accurately capture the rock deformation and damage characteristics at the specimen scale. In addition, the combined monitoring method of 3D-DIC and fiber grating can provide assistance in the prediction of rock crack expansion and potential fracture surfaces.