Deformable Joule Heating Electrode Based on Hybrid Layers of Silver Nanowires and Carbon Nanotubes and its Application in a Refreshable Multi‐Cell Braille Display

Abstract

AbstractJoule heating electrodes (JHEs) are required for thermal actuation systems. A highly stretchable, patternable, and low‐voltage operating JHE based on hybrid layers of silver nanowires and carbon nanotubes are reported. The conductive layers are applied on a locally pre‐strained bistable electroactive polymer (BSEP) membrane to form a wrinkled conductive surface with a low resistance of 300 Ω/sq, and subsequently patterned to a serpentine trace by laser engraving. The resistance of the resulting JHE electrode remains nearly unchanged up to 80−90% area strain. By applying a voltage of 7 − 9 V to the electrode, the temperature of the BSEP membrane increased to ~60 °C, well above the polymer's phase transition temperature of 46 °C, thereby lowering its modulus by a factor of 103. An electronic Braille device based on the JHEs on a BSEP membrane is assembled with a diaphragm chamber. The electrode is patterned into 3 × 2 individually addressable pixels. Through Joule heating of the pixels and local expansion of the BSEP membrane using a pneumatic pressure, the pixels deformed out of the plane by over 0.5 mm to display Braille letters. The Braille content can be refreshed for 20 000 cycles at the same operating voltage.