Abstract

BackgroundAortic root enlargement (ARE) procedures are believed to allow implantation of larger valve prostheses; however, little evidence exists to support the specific efficacy of various techniques. MethodsUsing a cadaveric model, 20 adult (72.4 ± 15.3 years) hearts were stratified into 4 groups based on annular diameter: <20 mm, 20-22 mm, 22-24 mm, and >24 mm. Each heart underwent an aortic valve replacement following a Nicks, Manougian, aortoventriculoplasty and modified Bentall procedure, with appropriate reversals between procedures. ResultsAll 4 groups experienced similar increases in annular diameter (P = 0.43) and prosthesis size implanted (P = 0.51) with each enlargement technique. The Nicks, Manougian, modified Bentall and aortoventriculoplasty procedures enlarged the annulus by 0.43 ± 0.45 mm, 3.63 ± 0.95 mm, 0.78 ± 0.65 mm, and 6.08 ± 1.19 mm, respectively (P < 0.001). No significant change in prosthesis size was observed after the Nicks procedure (P = not significant). Increases of 1.3 ± 0.5, 1.3 ± 0.5, and 2.7 ± 0.6 prosthesis sizes were achieved with the Manougian, modified Bentall and aortoventriculoplasty techniques respectively (P < 0.001). ConclusionsARE procedures appear equally efficacious in both small and larger aortic roots. Although all 4 ARE techniques increased the annular diameter, only the Manougian, modified Bentall and aortoventriculoplasty procedures allowed for the implantation of a larger prosthetic valve. The Nicks procedure, which is likely the most commonly performed ARE, does not allow for the implantation of a larger prosthesis. Surgeon preference and patient factors may help in selecting the most appropriate ARE technique, as the modified Bentall and Manougian procedures achieved similar increases in valve size.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.