Abstract
Active infrared thermography is an attractive and highly reliable technique used for the non-destructive evaluation of test objects. In this paper, defect detection on the subsurface of the STS304 metal specimen was performed by applying the line-scanning method to induction thermography. In general, the infrared camera and the specimen are fixed in induction thermography, but the line-scanning method can excite a uniform heat source because relative movement occurs. After that, the local heating area due to Joule’s heating effect was removed, and filtering was applied for the 1st de-noising. Threshold-value-based binarization processing using the Otsu algorithm was performed for clear defect object recognition. After performing the 2nd de-noising, automatic defect recognition was performed using a boundary tracking algorithm. As a result, the conditions due to the parameters of the scanning line for the thermal image were determined.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
