Abstract
In the past 20 years, the phase-change memory technology has achieved rapid development, of which alloys along the GeTe-Sb2Te3 pseudobinary line are the most extensively researched materials. In recent years, Sb2Te3-based materials start to attract the attention of researchers. A recent study has shown that the Sb2Te3 (ST) material has a face-centered cubic (Fcc) phase which contains a high concentration of vacancies at low temperature. Due to the poor amorphous thermal stability of ST, the as-deposited film obtained by physical vapor deposition is crystalline (Fcc phase). Therefore, we proposed a vacancy control mechanism, using inert gas Ar to ion implantation of as-deposited ST films, redistributing vacancies in the as-deposited ST films. Through different doses of Ar ion implantation, we obtain amorphous ST materials with different resistivity. We find that after the injection dose reached 1 × 1016 cm-2, the effect of continued increase in the implantation dose on the resistivity of the thin film is negligible. After ion implantation, the transition temperature of the metastable Fcc phase to the hexagonal phase (Hex) is increased, which is beneficial to improve the power consumption and endurance of the device. The ST which is injected with a dose of 1 × 1016 cm−2 Ar ion based phase-change memory cell can perform erasing operation in 100 ns, showing low power consumption potential. Our work provides a new idea and method for the application of future defect control in phase-change memory research.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.