Abstract
Low-excess-loss arrayed waveguide gratings are enabled by unique application of deep UV lithography in InP integrated photonics through reduced feature sizes and, more specifically, well-resolved inter-waveguide gap dimensions. Submicrometer wafer-flatness is shown to be required to achieve the critical dimension uniformity better than 10 nm on 3-in substrates. Arrayed waveguide grating devices were fabricated and the effect of inter-waveguide gap scaling on the excess losses was measured and compared to simulations. Excess losses down to 0.15 dB were demonstrated to be lower than predicted with the 2-D simulations. The tapering of the etch depth inside the gaps due to the lag effect of the etch process may explain the improvements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have