Abstract
Coal combustion is one of the major pathways by which arsenic enters the ecological environment. An effective method to control arsenic emissions in-furnace is to transform the arsenic from a vapour to fly ash particles using mineral sorbents. However, flue gas components have a significant effect on gas-phase arsenic adsorption, which limits the industrial application of mineral sorbents. In this paper, the effect mechanism of flue gas components (NaCl/HCl/SO2/CO2) on gas-phase arsenic adsorption over different mineral oxide sorbents was investigated. The results demonstrate that the order of arsenic adsorption is CaO > MgO/Fe2O3> NaCl > Al2O3 > SiO2. NaCl promotes the arsenic adsorption of CaO above 800 °C, and the arsenic removal efficiency of CaO with 5 % NaCl is 52.51 % at 900 °C. NaCl inhibits the arsenic adsorption of MgO and Fe2O3, and promotes arsenic adsorption by Al2O3 and SiO2. Acid gases inhibit arsenic adsorption by the sorbents and the order of the inhibition intensity of acid gases at 700 °C is HCl > SO2 > CO2. The active sites (CaO, FeO, or AlO bonds) in the sorbents are the main reaction sites for arsenic adsorption, and captured arsenic is in the form of AsO21− and AsO43-.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
