Deep geophysical investigation in urban area: Ferrara city example

Abstract

<p>The role of applied geophysics for the new scenario of the increasing global urbanization is going to grow day by day. In this scenario a detailed knowledge of the geological subsoil and its iteration with urban infrastructures became a fundamental issue for urban planning. A novel sub-discipline, called Urban Geophysics (Lapenna, 2017) , has recently been developing in the field of geophysics for analyzing limits and potentialities of well-known geophysical techniques in urban and industrialized areas. The application of some geophysical methods allows the recognition of geological structures from near surface down to more several hundred meters. The urban environment, characterized by a difficult logistic and a high level of noise, has a strong impact on the applicability of the geophysical prospecting methods and on the data quality.</p><p>This paper presents the results obtained by Deep Electrical Resistivity Tomography (DERT) and P-wave seismic reflection surveys performed in the city of Ferrara, which is interested in the management of geothermal resources and in the mitigation of seismic risk (CLARA-“Cloud Platform and smart underground imaging for natural risk assessment” Project funded by Italian MIUR). Along the eastern flank of the city walls, DERT and Reflection Seismic profiles were carried out in order to improve the geological information of the urban context.</p><p>DERT applications are not very common and there are only few published examples. It consists to inject direct current (square wave) into the ground, depending on the arrangement of the input points and the electrical resistivity of the subsoil, the shape of the electric field that is measured at the surface. The peculiarity of the DERT is the use of large electrode distances (>200 m) and long profiles (>3000 m) in order to reach large investigation depths (>300 m).</p><p>Seismic reflection investigations offer a powerful non‐invasive tool suitable for mapping the subsurface geological framework from the very near‐surface to hundreds of metres below surface. Recently several seismic surveys was performed in urban environment by using frequency-controlled vibroseis sources both in P- and SH-wave.</p><p>Along the eastern flank of the city walls, a DERT (5500m long) and a reflection seismic (2500m acquired by a MiniVib source in P-wave configuration) profiles were carried out in order to improve the geological information of the urban context. The joint interpretation of DERT and seismic data allowed to reconstruct the 'local' stratigraphic-depositional evolution until a depth of about 1 km, and to highlight the occurrence of a sin-depositional Quaternary tectonic tilting associated to the growth of a fault-propagation fold.</p>