Abstract
The pectin from Ficus carica Linn. (fig) peels is a valuable and recyclable constituent that may bring huge economic benefits. To maximize the utilization of this resource, deep eutectic solvent (DES)-assisted extraction was applied to extract pectin from fig peels, and the extraction process was optimized with response surface methodology. When DES (choline chloride/oxalic acid = 1:1) content was 168.1 g kg-1, extraction temperature was 79.8 °C, liquid-solid ratio was 23.3 mL g-1, and extraction time was 120 min, the maximum yield of 239.6 g kg-1 was obtained, which was almost twice the extraction of hot water. DES-extracted fig peel pectin (D-FP) exhibited better nature than hot water-extracted fig peel pectin (W-FP) in terms of uronic acid content, particle size distribution, and solubility, but lower molecular weight and esterification degree. D-FP and W-FP had similar infrared spectra and thermodynamic peaks but differed in monosaccharide compositions. D-FP also showed good antioxidant capacities and exhibited better functional activities than W-FP. These results indicated that D-FP was of promising quality being utilized in food or medical industries and the optimal DES-assisted extraction method might be applied as a sustainable process for the effective extraction of bioactive pectin from fig peels with the excellence of low equipment requirements and simple operation. © 2024 Society of Chemical Industry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.