Decreasing the Radiated Acoustic and Vibration Noise of a Mid-Size AUV

Abstract

An Odyssey IIb autonomous underwater vehicle (AUV) made by Bluefin Robotics, Inc., was acquired by the Marine Physical Laboratory, Scripps Institution of Oceanography, to conduct research in underwater acoustics as well as provide a platform for other scientific studies. The original Odyssey IIb tail cone was replaced with a ducted fan, vectored thrust system installed on vehicles currently sold by Bluefin. In initial sea tests with the new thrust system, the acoustic self noise levels of the vehicle while underway were 20 to 50 dB higher than typical ocean background noise levels, preventing the vehicle's use as a receiver of low level sounds. Controlled tests were performed to characterize the radiated and vibration noise of the AUV propulsion and actuators. Once this baseline was established, changes were made, mostly to the tail cone propulsion, to decrease the vehicle's self noise. The resulting self noise levels of the AUV from 10 Hz up to 10 kHz measured while underway by a hydrophone mounted on the AUV's inner shroud now are at or below typical shallow water background noise levels except in three bands; below 250 Hz, around 500 Hz, and from 0.9 to 2.0 kHz. The goal of this paper is to describe these changes and their effects in lowering vehicle noise levels.