Decoration of graphene oxide with NiO@polypyrrole core-shell nanoparticles for the sensitive and selective electrochemical determination of piceatannol in grape skin and urine samples

Abstract

For the first time, we developed an electrochemical sensor for piceatannol based on a new type of nanocomposite: graphene oxide nano sheets decorated with core-shell NiO@polypyrrole nanoparticles (NiO@Ppy/GO) mixed with nafion and casted on the surface of glassy carbon electrode. The nanocomposite was characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction and Fourier transform infrared spectroscopy (FT-IR) techniques. The square wave voltammetry as a sensitive technique and cyclic voltammetry were selected for the quantification of piceatannol in 0.1 M phosphate buffer solution (pH 7.0). Several parameters were evaluated such as pH value, scan rate and supporting electrolyte type for the determination of piceatannol. In addition, selectivity and repeatability measurements were also evaluated. Under the optimized conditions, linear range and limit of detection were obtained 0.01–10.0 µM and 0.003 µM, respectively. Relative standard deviation for 3.0 µM and 6.5 µM were calculated 3.25% and 1.83%, respectively. The proposed sensor was applied successfully for the quantification analysis of piceatannol in grape skin essential oil and urine sample with satisfactory results.