Abstract
The aim of this study was to fabricate CNT@MgO@CuFe2O4 nanorod composite as a novel adsorbent for the removal of Pb (II) ions from aqueous media. The structural features of CNT, CNT@MgO and CNT@MgO@CuFe2O4 composite were studied by FTIR, XRD, VSM, BET, SEM, EDX, and Map analyses. BET analysis indicated that MgO/CNT and CNT@MgO@CuFe2O4 composite have mesoporous structures. Also, the specific surface area of CNT@MgO and CNT@MgO@CuFe2O4 were 84.84 and 95.79 m2/g, respectively. VSM analysis also indicated that the CNT@MgO@CuFe2O4 composite has a paramagnetic property. Moreover, the utmost sorption efficiency of Pb (II) ions using CNT, CNT@MgO and CNT@MgO@CuFe2O4 composite were obtained 92.37%, 96.34%, and 99.09%, respectively, indicating that the removal efficiencies were significantly increased by modifying the CNT surface. Besides, the maximum sorption capacity of CNT, CNT@MgO and CNT@MgO@CuFe2O4 by the Langmuir model were 27.7, 32.68, and 47.62 mg/g, respectively, indicating that the CNT@MgO@CuFe2O4 composite has the highest sorption capacity. Also, the equilibrium and thermodynamic behavior indicated that the sorption process of Pb (II) using all three adsorbents is physical, favorable, exothermic, and spontaneous. In general, the findings revealed that the CNT@MgO@CuFe2O4 nanorod composite can be used effectively to remove Pb (II) ions from wastewater.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
