Abstract
Copper is a potential replacement for aluminum in future ultra large scale integrated (ULSI) circuits, due to its lower resistivity and better resistance to electromigration. Metal-organic chemical vapor deposition (MOCVD) of Cu offers advantages of conformal coverage and selective growth. We have studied the thermal decomposition of a Cu MOCVD precursor, hexafluo-roacetylacetonate copper vinyltrimethylsilane (Cu I(hfac)(vtms)), on both air-oxidized and N 2 ion beam sputter-annealed TiN single crystal (100) and polycrystalline surfaces. TiN is thought to be an effective barrier to the diffusion of Cu. Coverages and chemical bonding of C, O, F, and Cu were monitored by X-ray photoelectron spectroscopy (XPS). Dosing TiN with Cu I(hfac)(vtms) at 25°C results in chemisorption of Cu I(hfac) and desorption of vtms. On oxidized surfaces, little or no decomposition of CF 3 groups is detected at room temperature, while on sputter-annealed polycrystalline and single crystal surfaces, a small amount of decomposition is indicated by a CF 2 feature in the C(1s) XPS spectrum, and a low-binding energy fluoride in the F(1s) spectrum. Between 100°C and 250°C, Cu I(hfac) decomposes to evolve gaseous products and leaves Cu, F, and C on the surface. Further heating leads to diffusion of Cu into the TiN (confirmed by Rutherford backscattering spectroscopy), apparently enhanced by simultaneous diffusion of F. Decomposition of the hfac CF 3 groups at elevated temperature is independent of the nature of the TiN surface (i.e. polycrystalline versus (100), or clean versus oxidized). However, Cu diffusion depends strongly on the surface preparation. The lowest temperatures at which Cu diffusion was observed are 250°C, 320°C, and 430°C, for oxidized polycrystalline, clean polycrystalline, and clean single crystal (100) TiN, respectively. Implications of these decomposition and diffusion processes for Cu MOCVD are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.