Abstract
Assuming a series-type microbial fuel cell (MFC) that sequentially consumes organic acid components, the effects of the electrode material, external resistance, and temperature of MFC on the decomposition characteristics of acetate and propionate were investigated. As to electrode materials, propionate decomposition required less time in carbon cloth (CC) than that in carbon felt (CF), and maximum power was produced higher in CC than that in CF as well as acetate substrate. When the external resistance of 1000 Ω was replaced with 100 Ω or 10 Ω, both the decomposition rate and maximum power in propionate were lower than those in acetate, respectively. The time required for acetate decomposition at the temperature of 30 °C and 37 °C was 14.8 and 19.4 h, while 25.3 and 17.2 h in propionate at 30 °C and 37 °C, respectively. The microbial community changed significantly between 30 °C and 37 °C of the temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.