Decolorization of Acid Red 1 dye solution by Fenton-like process using Fe–Montmorillonite K10 catalyst

Abstract

In this work, the decolorization of Acid Red 1 (AR1) dye was conducted using Fe(III) oxide immobilized on Montmorillonite K10 (Fe–MK10) catalyst in the presence of hydrogen peroxide (H 2O 2) in batch process. The effects of different parameters such as iron loading (Fe 3+) on Montmorillonite K10 (MK10), catalyst dosage, solution pH, initial concentration of H 2O 2 and AR1 and reaction temperature on the decolorization efficiency of the process were studied. The results indicated that by using 5.0 g L −1 catalyst dosage of 0.14 wt.% Fe–MK10 at pH 2.5 and 16 mM of H 2O 2, 99% of the 50 mg L −1 of AR1 was decolorized within 150 min. Leaching test indicated that the leached iron from the catalyst was less than 5 mg L −1.