Abstract
Colour substances in dyeing effluents normally cause certain difficulties in traditional biological treatment processes due to their nonbiodegradable nature. It is necessary to remove colour from dyeing effluents with the help of some physical or chemical treatment processes. This study aims to investigate the colour removal from dyeing wastewater using a TiO2-sensitized photo-oxidation process and the biodegradability of the products formed in the wastewater. Synthetic dyeing wastewater samples were exposed to near UV radiation at a wavelength of 350 nm in the presence of TiO2 and aeration. The results show that most dyes used in the experiment can be degraded by the sensitized photo-oxidation successfully. Colour removal from the wastewater was above 95% after 4-6 hours treatment. It was found that there was a relationship between the chemical oxygen demand (COD), total organic carbon (TOC) and biochemical oxygen demand (BOD). While COD and TOC in the wastewater were decreased during the reaction, BOD was found to be increased, which implies that the TiO2-sensitized photo-oxidation can enhance the biodegradability of the dyeing wastewater. As a process, it might be an effective method to remove colour and to further remove COD after treating dyeing effluent by a conventional biological treatment process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.