Abstract
Polyvinyl chloride (PVC) waste generation has significantly increased in recent years and their disposal is considered a major environmental concern. Removal techniques of chlorine from PVC waste are being studied to minimize a negative environmental impact. In this work, the use of K2CO3 as an alkaline additive to improve the dechlorination efficiency (DE) in the hydrothermal degradation of PVC wires was studied. Different experiments were carried out varying both temperature (175, 200, 225, 235 and 250 °C) and K2CO3 concentration (0.025, 0.050 and 0.125 M), using a solid/liquid ratio of 1:5 in order to determine the evolution of the dechlorination efficiency with time. About 4.66, 21.1, 24.4, 45.7 and 92.6 wt% of chlorine in PVC wire was removed during hydrothermal dechlorination (HTD) with an additive/chlorine ratio of 1:25 (K2CO3 solution of 0.050 M) at 175, 200, 225, 235 and 250 °C, respectively. Optimal additive/chlorine ratio decreased to 1:50 (K2CO3 solution of 0.025 M) at 250 °C, obtaining a dechlorination degree of 99.1% after 4 h without the need of metallic catalysts. Concerning the solid phase behavior during dechlorination, a linear correlation between the DE reached and the weight loss of PVC was found.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
