Abstract
The decreasing cost of renewable energy resources and the developments in storage system technologies over recent years have increased the penetration of photovoltaic systems to face the high rise in the electricity load. Likewise, there has also been an increase in the demand for tools that make this integration process in the current power systems profitable. This paper proposes a mathematical model based on the DC optimal power flow equations to find the optimal capacity of the PV panels and batteries for a standalone system or a system supported by the grid, while the investment and the energy required by the grid are minimized. In this regard, five different locations have been used as case studies to measure the influence of the irradiance level on the PV-Battery capacity installed and on the economic indicators such as CAPEX, OPEX, NPV, IRR, and the payback period. Thus, a modified 14-bus system has been used to replicate the grid technical limitations and show that a PV-Battery system connected to the grid could produce 26.9% more savings than a standalone PV-Battery and that a location with irradiance levels over 6.08 (kWh/m2/yr) could reduce the payback period for two years.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
