Abstract
A tunable SrTiO3 solidly mounted bulk acoustic wave resonator has been designed, fabricated, and tested. The solidly mounted resonator was implemented using an acoustical Bragg reflector of alternating high and low acoustic impedance layers. The resonator demonstrated a frequency tunability of 1%, from 5.87to5.81GHz with an applied bias of 0–7.5V, respectively. A return loss of −6.5dB was observed at an applied bias of 7.5V. The quality factor at the resonant frequency was 78 and relatively constant with applied bias. The effective electromechanical coupling coefficient was 2% and near linear with applied bias.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
