Abstract
A series of polyurethane (PU) samples based on poly(tetramethylene glycol)/epoxy resin (EP) graft interpenetrating polymer networks (IPNs) were prepared and their damping, thermal, and mechanical properties were systematically studied in terms of composition and the value of the PU isocyanate index (R). The damping properties and thermal stability measurements revealed that the formation of PU/EP IPN could improve not only the damping capacity but also the thermal stability. Meanwhile, mechanical tests showed that the tensile strengths of the IPNs decreased while their impact strengths increased with increasing PU content. The value of R also had significant impacts on the properties of the IPNs when the PU and EP ratio was fixed, which could be an effective means for manipulating the fabrication of PU/EP IPNs. The morphologies of the PU/EP IPNs were observed by SEM and AFM characterization and the relationship between the morphologies and properties is discussed. With the results in hand, the PU/EP IPNs hold promise for use in structural damping materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.