Abstract
Interpenetrating polymer networks (IPNs) were prepared from polyurethane (PU)-modified epoxy with different molecular weight of polyol and polyurethanes based on the mixture of polydiol and polytriol by a one-shot method. Two types of PU-modified epoxy: PU-crosslinked epoxy and PU-dangled epoxy were synthesized, and the effects of the different molecular weights of polyol in the PU-modified epoxy/PU IPNs on the dynamic mechanical properties, morphology, and damping behavior were investigated. The results show that the damping ability is enhanced through the introduction of PU-modified epoxy into the PU matrix to form the IPN structure. As the molecular weight of polyol in PU-modified epoxy increases, the loss area (LA) of the two types of the IPNs increases. PU-dangled epoxy/PU IPNs exhibit much higher damping property than that of the PU-crosslinked epoxy/PU IPNs with 20 wt % of PU-crosslinked epoxy. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 328–335, 1999
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.