Abstract
There is two typical damage pattern at broad-narrow joint of CRTSII slab track breakage of narrow joint and fracture at junction between broad joint and narrow joint. This paper aims to study the damage mechanism and develop of broad-narrow joint of CRTSII slab track and put forward the methods to reduce the damage. Based on damaged plasticity model for concrete and cohesive zone model, the damage mechanism and development process of broad-narrow joint are analyzed in this study. The unequal width of broad joint and narrow joint, different concrete strength between broad-narrow joints and slab and slab integrity reducing due to the interface are the main reason for the typical damage. It is suggested to set the same width of broad joint and narrow joint, set the same strength of broad-narrow joint and slab and enhance the integrity of the slab by chipping or adding adhesives, among which the former two methods are more effective. Breakage of narrow joint is a gradual compression damage due to the lower concrete strength than slab. Fracture at the junction between narrow joint and broad joint is a mutational tension damage due to the unequal width of broad joint and narrow joint. The temperature gradient has significant effect on the compression damage, but small to the tension damage, it has the risk of complete destruction under extreme conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.