Abstract
The use of components obtained through the additive manufacturing (AM) technique has become increasingly widespread in recent years, playing a central role in industrial production, and in particular in some fields such as automotive, biomedical, aerospace and electronics. Among all AM techniques, FDM (Fused Deposition Modelling) represents the most used printing technique to produce polymeric and composite components, thanks to the flexible printing process, the low cost and the diversity of the materials adopted. The aim of the present work concerns the comparison between the mechanical properties of three plastic materials printed with the FDM technique (polylactic acid PLA, polyethylene terephthalate glycol-modified PETG and Acrylonitrile-butadiene-styrene ABS) using an Original Prusa i3 MK3S, by varying the raster angle between 0°, 45° and 90° degrees. Infrared Thermography has been adopted to monitor the temperature evolution during static tensile tests and to assess stress level that can initiate damage within the material. Failure analysis was performed to correlate the mechanical behaviour with the microstructural characteristics of the materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
