Abstract
Cheese whey and a dilute waste from a cheese factory with a Chemical Oxygen Demand of 66,000 and 4,000 mg (COD)/L respectively, were treated at high loading rates in 0.7 to 1.2 L downflow anaerobic stationary fixed film reactors and an upflow sludge bed reactor. In downflow stationary fixed film reactors treating cheese whey, COD removal efficiencies of 97% were achieved at a loading rate of 5 kg COD/m3/day and 92% at a maximum loading rate of 22 kg COD/m3/day. With dairy plant waste, loading rates of up to 15 kg COD/m3/day were possible with COD removal efficiencies averaging 75%, decreasing slightly with increasing loading rates. In an upflow sludge bed reactor the COD removal efficiency of dairy plant waste, decreased from 87% at 5 kg COD/m3/day to 73% at 15 kg COD/m3/day. A stationary fixed film reactor treating a skim milk powder waste (4,000 ppm) could only be operated at up to 10 kg COD/m3/day with a treatment efficiency of 72%. Methane was produced from all wastes at rates corresponding to 0.32 m3 CH4 (0°C, 1 atm) per kg COD removed. Results show that stationary fixed film reactors are capable of treating dairy wastes at high loading rates and high COD removal efficiencies.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
