Abstract

Consumption of photovoltaic solar panels is expected to increase, so the growing amount of end-of-life (EOL) solar panels will require large spaces for their disposal, which at the moment costs around 200 euros/ton. Thus, a proper treatment technique to recover secondary materials from this waste, which are mainly copper, aluminum, silicon, high-transmittance glass, and plastics, must be developed. The last three components are strongly attached to each other; hence, their detachment is necessary for recovery. To achieve this objective, a chemical route was chosen; in fact, solvent extraction is highly recommended, as it has a high separation efficiency. In this study, D-limonene as a bio-solvent was examined for detaching different components of solar panels from each other. A high efficiency for ethylene vinyl acetate (EVA) dissolution and components’ detachment under different conditions was achieved with the help of sonication power. The effects of sonication power, thermal pre-treatment, temperature, and contact time on detachment percentage were examined, and the best conditions (namely, no pre-treatment, medium sonication power of 450 W, temperature of 60 °C, and a contact time of 120 min) were found for total component detachment. Additionally, the recyclability of D-limonene was examined, and it was established that the solvent could carry out 100% component detachment for three cycles.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call