Abstract
The cyclic oxidation behavior of plasma surface chromising coating on titanium alloy (Ti–6Al–4V) was researched in air at 650°C, 750°C and 850°C. A NiCrAlY coating was prepared by multi-arc ion plating as a comparison. The surface morphologies, microstructures and phases of both coatings before and after oxidation were investigated using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffractometry (XRD). The results show that the chromising coating consisted of an outer layer of loose Cr deposition, an intermediate layer of compact Cr deposition and an inner Ti–Cr mutual diffusion layer. The multilayer oxide scales formed in the oxidation process, which has the better cyclic oxidation resistance compared with NiCrAlY thermal barrier coating. However, the brittleness of Ti(Cr, Al)2 laves phase resulted in spallation of oxide scales at 750°C and 850°C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.