Abstract
The purpose of this paper is to establish the cyclic bridging law of fibre-reinforced and rubberised materials. In this regard, uniaxial tensile fatigue tests controlled by crack mouth opening displacement were conducted. Different mortars incorporating or not rubber aggregates were tested and compared. Results show that the bridging stress decreases with the number of fatigue cycles for the same maximum crack width, irrespective of nature of the composite. The cyclic bridging stress degradation for large pre-cracked widths is limited for mortar reinforced with metallic fibres. In case of rubberised mortar, cyclic bridging stress degradation is limited at small pre-cracked width values. A combined use of rubber aggregates and fibres in the mortar appeared to be a suitable solution to limit the cyclic bridging stress degradation. Moreover, a mathematical fit on cyclic crack bridging law for fibre-reinforced and rubberised materials is proposed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: European Journal of Environmental and Civil Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
