Abstract
Heat storage with a thermochemical reaction has the advantages of a high heat storage density and no heat loss compared to conventional methods such as the sensible and latent heat. This method is promising to use in a thermal energy network because it is an efficient solution which addresses the time mismatch problem with regard to heat production and consumption. In this paper, we investigated Magnesium oxide (MgO) with different additives as a thermochemical material (TCM) coupled with the effects of several additives in an effort to improve the structural strength and reaction rate and reduce the initiation time. As additives in an MgO composite, Bentonite, Magnesium sulfate (MgSO4), and Zeolite 13X were chosen. With a cyclic scheduling experimental setup for the heat charging and discharging of the MgO composites, Bentonite as an additive improved the structural strength, and Zeolite 13X enhanced the reaction rate and led to faster reactions compared to only MgO as a TCM. With MgSO4 as an additive, however, the TCM composite showed a high reactivity during the a few cycles, and then rapidly became inactive due to byproducts side reaction. The results indicated that Bentonite and Zeolite additives, in an MgO composite, as a TCM can improve the mechanical strength and chemical reaction, optimum ratio is necessary to compromise promoting the thermochemical reaction.
Highlights
Thermal energy storage is one of the major components of a thermal energy network, and it serves to offset the time mismatch problem between heat production and consumption
The results indicated that Bentonite and Zeolite additives, in an Magnesium oxide (MgO) composite, as a thermochemical material (TCM) can improve the mechanical strength and chemical reaction, optimum ratio is necessary to compromise promoting the thermochemical reaction
Tpeak values formore the thermal and the Bentonite has no effect on using the TCM, the results show that it is advantageous to honeycomb maintain the compressive strength with regard to aspects
Summary
Thermal energy storage is one of the major components of a thermal energy network, and it serves to offset the time mismatch problem between heat production and consumption. This approach uses short-term or long-term heat storage to minimize the heat loss from power plants or industrial processes due to distance and time inconsistencies relative to the customer [1]. The heat energy density of phase-change heat storage is higher than that of sensible heat due to the latent heat, but there are limitations related to the temperature range and heat loss [2]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have