Cyberknife Dosimetric Planning Using a Dose-Limiting Shell Method for Brain Metastases.

Abstract

ObjectiveWe investigated the effect of optimization in dose-limiting shell method on the dosimetric quality of CyberKnife (CK) plans in treating brain metastases (BMs). MethodsWe selected 19 BMs previously treated using CK between 2014 and 2015. The original CK plans (CKoriginal) had been produced using 1 to 3 dose-limiting shells : one at the prescription isodose level (PIDL) for dose conformity and the others at lowisodose levels (10–30% of prescription dose) for dose spillage. In each case, a modified CK plan (CKmodified) was generated using 5 dose-limiting shells : one at the PIDL, another at intermediate isodose level (50% of prescription dose) for steeper dose fall-off, and the others at low-isodose levels, with an optimized shell-dilation size based on our experience. A Gamma Knife (GK) plan was also produced using the original contour set. Thus, three data sets of dosimetric parameters were generated and compared. ResultsThere were no differences in the conformity indices among the CKoriginal, CKmodified, and GK plans (mean 1.22, 1.18, and 1.24, respectively; p=0.079) and tumor coverage (mean 99.5%, 99.5%, and 99.4%, respectively; p=0.177), whereas the CKmodified plans produced significantly smaller normal tissue volumes receiving 50% of prescription dose than those produced by the CKoriginal plans (p<0.001), with no statistical differences in those volumes compared with GK plans (p=0.345). ConclusionThese results indicate that significantly steeper dose fall-off is able to be achieved in the CK system by optimizing the shell function while maintaining high conformity of dose to tumor.