Cyano-Coordinated Tin Halide Perovskites for Wearable Health Monitoring and Weak Light Imaging.

Abstract

Low-toxicity tin halide perovskites with excellent optoelectronic properties are promising candidates for photodetection. However, tin halide perovskite photodetectors have suffered from high dark current owing to uncontrollable Sn2+ oxidation. Here, 2-cyanoethan-1-aminium iodide (CNI) is introduced in CH(NH2)2SnI3 (FASnI3) perovskite films to inhibit Sn2+ oxidation by the strong coordination interaction between the cyano group (C≡N) and Sn2+. Consequently, FASnI3-CNI films exhibit reduced nonradiative recombination and lower trap density. The self-powered photodetector based on FASnI3-CNI exhibits low dark current (1.04 × 10-9 A cm-2), high detectivity (2.2 × 1013 Jones at 785nm), fast response speed (2.62 µs), and good stability. Mechanism studies show the increase in the activation energy required for thermal emission and generatedcarriers, leading to a lower dark current in the FASnI3-CNI photodetector. In addition, flexible photodetectors based on FASnI3-CNI, exhibiting high detectivity and fast response speed, are employed in wearable electronics to monitor the human heart rate under weak light and zero bias conditions. Finally, the FASnI3-CNI perovskite photodetectors are integrated with a 32×32 thin-film transistor backplane, capable of ultraweak light (170 nW cm-2) real-time imaging with high contrast, and zero power consumption, demonstrating the great potential for image sensor applications.