Abstract
Ball-end milling of sculptured surfaces is an efficient and cost effective manufacturing technique when compared with other methods. However, an accurate cutting force prediction is still challenging when the Cutter Workpiece Engagement (CWE) and Instantaneous Undeformed Chip Thickness (IUCT) vary simultaneously. In order to predict the milling force accurately, an algorithm is designed to obtain the CWE boundaries with the variable tool orientations. Inspired by the main idea of analytical CWE model, an improved Z-map method is developed, which is based on the classic Z-map method. The point cloud of tool envelope surface method is generated based on the classic Z-map and the points of the CWE are screened according to the chosen criteria. Afterwards, the IUCT is calculated numerically by the accurate cutting thickness model. In order to overcome the drawbacks of the IUCT method, a simplified IUCT model is proposed to eliminate the iterative calculation. Related milling experiments were carried out on Al7075 workpiece to validate the proposed models showing a good agreement with errors smaller than 12.5%. It can be concluded from simulation results that tool postures have a significant effect on the machining process. This contributes to in-depth understanding the material removal process and optimizing the process parameters of multi-axis machining processes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.