CWDM communication system based inline erbium-doped fiber amplifiers with the linear geometrical polarization model

Abstract

Abstract Optical fiber coarse wavelength division multiplexing (CWDM) with erbium-doped fiber inline-amplifiers for the linear polarization geometrical model is studied in this paper for fiber system optimization by using the Optisystem simulation software. Signal gain (SG), noise figure (NF), and signal/noise are measured against CWDM optical fiber variations. The erbium-doped fiber amplifier (EDFA) is based on the Giles model which solves the steady-state rate equations for SG and signal absorption parameters with the cross-section area of the amplifier itself. The signal is optimized at EDFA length of 6 m, 10 Gb/s data rates (DRs) transmission and 10 km CWDM fiber optic length (FOL). Max. Q factor is degraded and min. BER is upgraded with both CWDM optical FLs and higher DRs transmission increase.