Abstract
In this study, a new cut-out groove design is addressed, aiming to improve the crashworthiness of a gradual energy-absorbing structure for subway vehicles. First, the crashing characteristics of the gradual cut-out grooved energy-absorbing structure (GCGES) are studied and the finite element model (FEM) is validated by dynamic impact tests. Then, response surface (RS) models are established regarding the validated FEM. Based on RS models, the energy absorption (EA) and initial peak crushing force (IPCF) are formulated as functions of cut-out groove dimensions. In further, parametric studies are performed to evaluate the effects of design variables on collision responses. It is found that both EA and IPCF are negatively affected by the cut-out grooves. Particularly, the effect of design parameters on IPCF is obviously greater than that on EA capacity. To minimize the IPCF under the constraint of EA, optimization technology with adaptive simulated annealing (ASA) algorithm is adopted. The optimal results indicate that the IPCF decreases by 31.02% comparing with the initial designed GCGES and 63.60% comparing with the common flat surface energy-absorbing structure (FSES). From the vehicle safety view, the cut-out grooves are introduced successfully and the optimized GCGES is of considerable significance and advantages in crashworthiness application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.