Abstract
Curved hull plate forming, the process of forming a flat plate into a curved surface that can fit into the outer shell of a ship's hull, can be achieved through either cold or thermal forming processes, with the latter processes further subcategorizable into line or triangle heating. The appropriate forming process is determined from the plate shape and surface classification, which must be determined in advance to establish a precise production plan. In this study, an algorithm to extract two-dimensional features of constant size from three-dimensional design information was developed to enable the application of machine and deep learning technologies to hull plates with arbitrary polygonal shapes. Several candidate classifiers were implemented by applying learning algorithms to datasets comprising calculated features and labels corresponding to various hull plate types, with the performance of each classifier evaluated using cross-validation. A classifier applying a convolution neural network as a deep learning technology was found to have the highest prediction accuracy, which exceeded the accuracies obtained in previous hull plate classification studies. The results of this study demonstrate that it is possible to automatically classify hull plates with high accuracy using deep learning technologies and that a perfect level of classification accuracy can be approached by obtaining further plate data. 1. Introduction The outer shell of a ship is composed of hull plates that are generally formed as curved surfaces. To produce a curved surface from a flat steel plate, a curved hull plate-forming process involving the application of heat or pressure to the plate must be undertaken. Such forming processes can be categorized as either cold forming, in which the plate is bent using physical pressure, or thermal forming, in which bending stress is generated by applying heat to the plate. The former process is generally used to bend plates into cylindrical shapes using a rolling machine, whereas the latter is used to form more complex curved surfaces. In most shipyards, thermal forming is performed by skilled workers who apply direct heat to plates using a torch; accordingly, thermal forming is more difficult and time-consuming than machine-based cold forming and often constitutes a crucial bottleneck process in shipyard operation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.