Abstract
On-line pulsewidth modulation (PWM) pattern generators for current-source rectifiers and inverters offer a number of control advantages over off-line optimized patterns. However, when implemented using the principles which apply to voltage-source inverter PWM pattern generators, the switching frequency is equal to: (1) the carrier frequency in standard carrier-based implementations and (2) a function of the cycle frequency, sequence of space vectors, and selection of the zero space vector in space vector implementations. This paper shows that this frequency can be reduced to one-half of the respective frequencies. Two pattern generators are investigated: (1) an analog on-line carrier-based technique, namely, the modified dead-band technique and (2) a digital on-line space vector-based technique, where advantage is taken of the extra zero state available in current-source converters. It is shown that the switching frequency reduction is achieved with no penalty in the line current harmonic distortion. Moreover, a significant reduction of AC line current distortion is obtained with the modified dead-band technique for modulation indexes greater than 0.4. The principles of operation of the proposed schemes are explained, Experimental results on a 5 kVA current-source rectifier and a 5 kVA current-source inverter confirm the feasibility and features of the proposed pattern generators.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.