Abstract
Alkynyl-terminated polyethylene oxide−tetrahydrofuran (ATPET) and glycidyl azide polymer (GAP) could be linked through click-chemistry between the alkynyl and azide, and the product may serve a binder for solid propellants. The effects of the energetic plasticizers A3 [1:1 mixture of bis-(2,2-dinitropropy) acetal (BDNPA) and bis-(2,2-dinitropropyl) formal(BDNPN)] and Bu-NENA [N-butyl-N-(2nitroxyethyl) nitramine] on the curing reaction between ATPET and GAP have been studied. A diffusion-ordered nuclear magnetic resonance spectroscopy (DOSY-NMR) approach has been used to monitor the change in the diffusion coefficient of cross-linked polytriazole polyethylene oxide−tetrahydrofuran (PTPET). The change in the diffusion coefficient of PTPET with A3 plasticizer is significantly higher than that of PTPET with Bu-NENA. Viscosity analysis further highlighted the difference between A3 and Bu-NENA in the curing process—the curing curve of PTPET (A3) with time can be divided into two stages, with an inflection point being observed on the fourth day. For PTPET (Bu-NENA), in contrast, only one stage is seen. The above methods, together with gel permeation chromatography (GPC) analysis, revealed distinct effects of A3 and Bu-NENA on the curing process of PTPET. X-ray Photoelectron Spectroscopy (XPS) analysis showed that Bu-NENA has little effect on the valence oxidation of copper in the catalyst. Thermogravimetric (TG) analysis indicated that Bu-NENA helps to improve the thermal stability of the catalyst. After analysis of several possible factors by means of XPS, modeling with Material Studio and TG, the formation of molecular cages between Bu-NENA and copper is considered to be the reason for the above differences. In this article, GAP (Mn = 4000 g/mol) was used to replace GAP (Mn = 427 g/mol) to successfully synthesize the PTPET elastomer with Bu-NENA plasticizer. Mechanical data measured for the PTPET (Bu-NENA) sample included ε = 34.26 ± 2.98%, and σ = 0.198 ± 0.015 MPa.
Highlights
Nowadays, the most widely used types of propellants include double-based propellant, butyl-hydroxyl propellant, NEPE propellant [NitrateEster Plasticized Polyether (NEPE) Propellant], and so forth
Viscosity analysis further highlighted the difference between A3 and Bu-NENA in the curing process—the curing curve of polytriazole polyethylene oxide−tetrahydrofuran (PTPET) (A3) with time can be divided into two stages, with an inflection point being observed on the fourth day
A3 [a 1:1mixture of bis-(2,2-dinitropropy) acetal (BDNPA) and bis-(2,2-dinitropropyl) formal (BDNPF)] and Bu-NENA [N-butyl-N-(2nitroxyethyl) nitramine] are two commonly used plasticizers in composite solid propellants. [1,2,3] These two plasticizers are widely applied in double-based and gun propellants, significantly improving their energy characteristics. [2,4] Recently, higher requirements have been placed on the performance indicators of solid composite propellants
Summary
The most widely used types of propellants include double-based propellant, butyl-hydroxyl propellant, NEPE propellant [NitrateEster Plasticized Polyether (NEPE) Propellant], and so forth. [6,7] This reaction has already been successfully applied in many fields, for example, biomedicine, polymer synthesis, [8] solid phase reaction, [9] and so forth. [10,11] Polytriazole polyethylene oxide−tetrahydrofuran (PTPET) elastomer is an example of a propellant successfully assembled by click chemistry in. An issue arises when A3 and Bu-NENA plasticizers are applied in PTPET-based propellant. Compared to those with A3, elastomers and propellants including Bu-NENA cannot be successfully cured into finished products. It is important to understand the role of the Bu-NENA in the curing process of the PTPET elastomer
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
