Abstract
In this work, isothermal curing kinetics of a non-catalysed and non-blown reaction between castor oil based polyester polyol and polymeric 4, 4’-diphenyl methane diisocyanate (MDI) has been investigated using Differential Scanning calorimeter (DSC) and viscosity build up studies. Several phenomenological models like Ozawa, Kissinger and Kissinger- Akahira-Sunose (KAS) isoconversional methods has been adopted to study polymerisation kinetics through DSC. DSC cure kinetics is studied at different heating rates (5°C/min, 10°C/min, 15°C/min and 20°C/min). Viscosity build up studies are also done for evaluating the kinetic parameters. These studies have been conducted for an isocyanate index [NCO equivalents/OH equivalents] of 1:1 and 1:2. Dynamic viscosity is measured as a function of time and rate constant and activation energy of the curing system is evaluated. Activation energy obtained for 1:1 index through Ozawa and Kissinger methods is found to be in the range of 70kJ/mol and for 1:2 index it is found to be in the range of 50kJ/mol. Thermodynamic parameters like Gibb’s free energy (Activation Free Energy), activation enthalpy and activation entropy of the polymerisation kinetics is calculated using Wynne-Jones-Eyring-Evans Theory.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.