Abstract

A significant problem of large-scale cultures, but scarcely studied for recombinant E. coli, is the presence of gradients in dissolved oxygen tension (DOT). In this study, the effect of DOT gradients on the metabolic response of E. coli and production of recombinant pre-proinsulin, accumulated as inclusion bodies, was determined. DOT gradients were simulated in a two-compartment scale-down system consisting of two interconnected stirred-tank bioreactors, one maintained at anoxic conditions and the other at a DOT of at least 6%. Cells were continuously circulated between both vessels to simulate circulation times (tc) of 20, 50, 90, and 180 sec. A complete kinetic and stoichiometric characterization was performed in the scale-down system as well as in control cultures maintained at constant DOT in the range of 0-20%. The performance of E. coli cultured under oscillating DOT was significantly affected, even at a tc of 20 sec corresponding to transient exposures of only 13.3 sec to anaerobic conditions. Specific growth rate decreased linearly with tc to a maximum reduction of 30% at the highest tc tested. The negative effect of DOT gradients was even more pronounced for the overall biomass yield on glucose and the maximum concentration and yield of pre-proinsulin. In these cases, the losses were 9%, 27%, and 20%, respectively, at tc of 20 sec and 65%, 94%, and 87%, respectively, at tc of 180 sec. Acetic, lactic, formic, and succinic acids accumulated during oscillatory DOT cultures, indicating that deviation of carbon flow to anaerobic metabolism was responsible for the observed losses. The results of this study indicate that even very short exposures to anaerobic conditions, typical of large-scale operations, can substantially reduce recombinant protein productivity. The information presented here is useful for establishing improved rational scale-up strategies and understanding the behavior of recombinant E. coli exposed to DOT gradients.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call