Abstract
ABSTRACT In comparison with the stoichiometry and Zn-rich/Cu-poor compositions of Cu2ZnSnS4 (CZTS) photovoltaic material, the properties of Cu-poor films have not been explored adequately. In this study, Cu-poor films were spin-coated from a non-hazardous methanol-based solution. Films were subject to a brief annealing process in the temperature range of 350–550 °C. As-grown and annealed films were uniform, compact, photosensitive, and free from secondary phases. As the annealing temperature increased, the size of crystallites increased and the film dislocation density decreased steadily. Films had a direct bandgap of 1.4–1.5 eV. The presence of three sub-bandgap transitions were detected and identified. By varying the annealing temperature, hole concentration, hole mobility, and film resistivity varied systematically in the range of 1016–1018 cm−3, 1–140 cm2/V-s, and 0.02–64 Ωcm, respectively. Cu-poor films showed structural and optoelectronic properties similar to the Zn-rich/Cu-poor and stoichiometric films and, thus, have the potential for device applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have