Abstract
A passively Q-switched erbium-doped fiber laser (EDFL) using copper telluride-polyvinyl alcohol (Cu2Te-PVA) thin film as saturable absorber (SA) was proposed and demonstrated. The generated Q-switched pulses could be tuned over a tuning range of 44 nm from 1530 to 1574 nm, with the addition of a tunable bandpass filter into the C-band laser cavity. The pump power of 130.1 to 221.0 mW was used to observe the output pulses, which had repetition rates from 51.3 to 61.7 kHz, with a minimum pulse width of around 1.84 µs and highest pulse energy of 7 nJ. The generated pulses were stable with a constant signal to noise ratio value of around 51 dB when tested under continuous operation over a period of 60 min. To the best of our knowledge, this is the first demonstration of Q-switched pulses induced by a Cu2Te-PVA based SA in an EDFL.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
