Abstract

Solid Oxide Fuel Cells (SOFCs) are one of the most attractive energy conversion and storage devices, which can be applied for decentralized energy applications. However, the high operating temperature making SOFCs still unmarketable, which indicates that lowering the working temperature of SOFCs while still maintaining a high-power output is very crucial. For Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs), new cathode materials with high electrocatalytic activity and stability are necessary to provide a stable and high performance of cells. Perovskite-structured oxide (ABO3−δ) is one group of the most interesting material candidates for IT-SOFCs, presenting great potential in chemical composition modifications, yielding the design and gain of desired physicochemical and electrochemical properties [1]. The simple perovskite LaCuO3 is one of the well-studied Cu-content oxides with a high conductivity (106 S·cm−1), but it can be hardly obtained and suffers with stability issues in air [1, 2]. To stabilize the perovskite structure and to improve electrochemical properties of Cu-content oxides A-site and B-site modification strategy can be applied. It has been noted that Cu- and Ni-containing LaNi0.5Cu0.5O3−δ simple perovskite possesses low cathodic polarization of 0.056 Ω·cm2 at 800 °C, and a high power output of 870 mW·cm−2 at 900 °C [1, 3]. The generation of oxygen vacancies by strontium doping contributes to the increase of ionic conductivity component, and the Sr dopant can reduce the oxygen vacancy formation energy and increase the ionic conductivity of La1−xSrxMO3−δ (M = Fe, Mn) perovskites [1,4]. Therefore, in this work, Cu-content La1−xSrxNi1−yCuyO3−δ oxides with strontium doping at the A-site were evaluated as very promising Co-free cathode material candidates for IT-SOFCs.In this work, all La1−xSrxNi1−yCuyO3−δ compounds have been successfully obtained using soft chemistry. The room-temperature crystal structure of all oxides was assigned to the R-3c trigonal system. The substitution of La with Sr lowers the phase transition temperature from the R-3c space group to Pm-3m simple perovskite while increases the oxygen non-stoichiometry and the thermal expansion coefficient of studied materials. All investigated materials are chemically compatible with GDC-10, while unstable in contact with LSGM and 8YSZ. The manufactured anode-supported IT-SOFC with the La0.95Sr0.05Ni0.5Cu0.5O3−δ cathode presents an excellent power density of 445 mW·cm−2 at 650 °C in humidified H2. The results confirmed that La1−xSrxNi1−yCuyO3−δ perovskites can be potentially qualified as promising cathode candidates for IT-SOFCs, yielding promising electrochemical performance in the intermediate-temperature range [1].

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call