Abstract
Thermal energy storage and surge protection materials store surplus heat energy and inhibit the increase in the temperature of materials in case of excess energy generation or surge. This study explores usage of Cu-Bi alloys comprising high volume fraction of Bi for energy storage and surge protection. Cu-Bi alloys, comprising 20, 40 and 60vol% of Bi, are prepared using liquid phase sintering by heating a mixture of Cu and Bi powders above the melting temperature of Bi, Tm, Bi. Compression testing of Cu-Bi alloys is conducted at temperatures above and below Tm, Bi. It is observed that the flow stress, yield stress, stress exponent and strain hardening exponent drastically decrease above Tm, Bi. In addition, compression creep testing is performed for Cu-40vol% Bi at temperatures above and below Tm, Bi. The experimental results establish that this alloy can sustain moderate level of stresses at temperatures above Tm, Bi for long periods. Moreover, differential scanning calorimetry is employed to evaluate the heat storage capacity of the alloy with different compositions and effect of cyclic heating and cooling on the heat storage capacity. It is observed that the heat storage capacity of Cu-Bi alloy remains almost constant for several melting-solidification cycles. Finally, it is suggested that Cu-Bi alloy containing high volume fraction of Bi can be used for energy storage and thermal surge protection.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.