Abstract
Abstract Stress distribution and deformation on the CT-type(Cross Tension type) spot welded lap joint subjected to out of plane tensile load were investigated by finite element method. Using the maximum principal stresses at the nugget edge obtained by FEM analysis, evaluated the fatigue strength of the CT-type spot welded lap joints having various dimensions and materials. and also, the influence of the geometrical parameters of CT-type spot welded lap joints on stress distribution and fatigue strength must be evaluated. thus, in this paper, ΔP-N f curve were obtained by fatigue tests. Using these results, ΔP-N f curve were systematically rearranged in the Δσ-N f relation with the hot spot stresses at the CT-type spot welded lab joints. It was found that the proposed Δσ-N f relation could provide a more reasonable fatigue design criterion for the CT-type spot welded lap joints. Key Words : Tensile shear load, Spot welding, Nugget, Stress concentration, Fatigue strength, Maximum stress
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.